2UUL WL‑3515 Double‑Sided Desoldering Wick – 3.5 mm × 1.5 m Copper Braid for Heavy-Duty Solder Removal

Description

2UUL WL-3515 Double-Sided Desoldering Wick – Precision Tool for Clean Solder Removal

When it comes to professional electronics and mobile repair, precision and efficiency are everything. Weak solder joints, excess solder, or poorly removed connections can easily compromise the performance of a device. That’s where the 2UUL WL-3515 Double-Sided Desoldering Wick steps in. Designed with high-quality copper braiding, this 3.5 mm × 1.5 m wick delivers clean, consistent, and professional-grade solder removal, making it a must-have tool for technicians, repair engineers, and DIY enthusiasts.

What is the 2UUL WL-3515 Desoldering Wick?

A desoldering wick, also known as solder braid, is a fine copper braid coated with flux. Its job is to absorb molten solder from joints, pads, and terminals when heated with a soldering iron. The WL-3515 is engineered with double-sided weaving technology, ensuring stronger absorption and faster wicking action compared to ordinary braids. With a width of 3.5 mm and a length of 1.5 m, it is versatile enough for a variety of repair jobs—from small PCB pads to larger electronic components.

Why Technicians Choose the 2UUL WL-3515

Not all solder wicks perform the same. Many low-grade options leave behind residue, require repeated heating, or fail to absorb solder evenly. The 2UUL WL-3515 overcomes these problems with:

• High-Quality Copper Braid – Ensures smooth solder absorption and excellent thermal conductivity.

• Pre-Fluxed Surface – Coated with high-grade flux to improve solder uptake and reduce oxidation.

• Double-Sided Weave – Provides enhanced wicking speed, removing more solder in less time.

• Precise Width (3.5 mm) – Wide enough for large joints yet accurate for PCB and IC repairs.

• Compact Roll (1.5 m) – Ideal length for daily repair tasks without unnecessary bulk.

Key Features of 2UUL WL-3515

1. Fast & Efficient Solder Removal
   The copper braid heats quickly and pulls molten solder into its weave, reducing rework time.

2. Double-Sided Absorption
   Unlike ordinary braids, this wick has a denser weave, allowing more solder to be lifted in one go.

3. Reduced Heat Stress
   Faster absorption means shorter heating time, protecting sensitive components from overheating.

4. Minimal Residue
   Leaves behind clean joints with less flux residue, reducing post-repair cleaning.

5. Versatile Size
   The 3.5 mm width is perfect for multiple applications—from desoldering connectors to IC chip pads.

Applications in Mobile & PCB Repair

The 2UUL WL-3515 Desoldering Wick is a multi-purpose tool that can be applied in:

• Mobile Phone Repairs – Removing solder bridges, cleaning pads for IC replacement, or fixing broken joints.

• PCB Maintenance – Clearing solder from pads, vias, or traces without damaging the board.

• IC Rework – Preparing component pads for reballing, BGA replacement, or chip installation.

• Connector and Port Repairs – Easily cleans solder from charging ports, audio jacks, and flex connectors.

• General Electronics Repair – Suitable for laptops, gaming consoles, tablets, and other devices.

How to Use the 2UUL WL-3515 Desoldering Wick

1. Prepare the Area – Clean the surface with isopropyl alcohol for best results.

2. Place the Wick – Position the braid directly over the solder joint you want to clean.

3. Apply Heat – Press the tip of a heated soldering iron onto the wick.

4. Observe Absorption – Watch as the molten solder gets drawn into the braid.

5. Trim Used Portion – Cut off the saturated part and repeat with a fresh section if needed.

Benefits Over Standard Desoldering Wicks

• Quicker Results – The double-sided design absorbs solder more effectively, cutting work time.

• Professional Finish – Leaves clean pads that are ready for resoldering.

• Component Safety – Reduces the chance of heat damage to delicate circuits.

• Cost-Effective – A 1.5 m roll offers multiple uses, making it economical for technicians.

• Reliable Performance – Consistent results in every application, unlike cheap alternatives.

Why 2UUL WL-3515 is Essential in Every Repair Kit

In today’s mobile repair and electronics industry, precision is not optional—it’s mandatory. Weak joints or excess solder can compromise device performance, leading to callbacks, rework, and customer dissatisfaction. The 2UUL WL-3515 helps avoid these issues by ensuring clean, reliable, and professional solder removal every time.

Whether you are a professional technician, a repair shop owner, or a DIY hobbyist, this desoldering wick provides the right balance of quality, durability, and efficiency.

Technical Specifications

• Brand: 2UUL

• Model: WL-3515

• Type: Double-sided desoldering wick

• Width: 3.5 mm

• Length: 1.5 m

• Material: Premium copper braid with flux coating

• Applications: Mobile repair, PCB work, IC replacement, electronic solder cleanup

Who Can Benefit from the WL-3515?

• Repair Centers – Handling high-volume PCB and mobile repairs.

• Independent Technicians – Needing a reliable solder removal tool for everyday jobs.

• Training Institutes – Teaching students the fundamentals of clean soldering and desoldering.

• DIY Enthusiasts – Performing electronics work at home with professional-grade results.

Final Verdict

The 2UUL WL-3515 Double-Sided Desoldering Wick (3.5 mm × 1.5 m) is more than just a tool—it’s an investment in clean, safe, and reliable solder removal. With its high-quality copper braid, superior absorption, and double-sided weaving, it guarantees professional results in every repair task.

If you want to speed up your workflow, reduce rework, and achieve precision soldering results, the WL-3515 is the right choice for your toolkit. It embodies what every technician looks for in a desoldering solution: efficiency, safety, and consistency.