2UUL DW01-3015 Mobi Desoldering Wick (3.0mm x 1.5m) – Set of 5

Description

2UUL DW01-3015 Mobi Desoldering Wick – Set of 5 (3.0mm x 1.5m)

The 2UUL DW01-3015 Mobi Desoldering Wick is a professional-grade tool designed to make solder removal cleaner, faster, and more efficient. Specially built for mobile motherboard repair, PCB maintenance, and electronics rework, this set of five rolls offers a perfect combination of quality, precision, and value. With its 3.0mm width and 1.5m length per roll, the 2UUL DW01 provides broader coverage for larger solder points while still maintaining the control needed for delicate tasks.

If you work in mobile phone repair, laptop servicing, or electronic circuit maintenance, you know how important it is to have the right desoldering wick at hand. The 2UUL DW01 is engineered to deliver consistent performance, ensuring that you can quickly and effectively remove solder without damaging sensitive components or circuit pads.

Premium Quality Copper Braid

At the heart of the 2UUL DW01-3015 is its high-purity copper braid. Copper is known for its excellent thermal conductivity, allowing heat to transfer quickly from the soldering iron to the wick, and then to the solder joint. This ensures that solder is absorbed efficiently, minimizing heat exposure to surrounding components. The copper is also treated to resist oxidation, which means the wick maintains its effectiveness even when stored for extended periods.

Perfect Width for Larger Pads & Tracks

With its 3.0mm width, the 2UUL DW01 is ideal for removing solder from wider pads, large IC legs, and heavy solder joints. Whether you’re cleaning up after removing a BGA chip, tidying up a mobile motherboard, or reworking through-hole components, this width allows for faster solder removal over a larger area. It’s also especially useful for clearing bridges or excess solder from multi-pin connectors.

Pre-Fluxed for Maximum Efficiency

One of the standout features of the 2UUL DW01 is its pre-fluxed design. The copper braid is coated with a high-quality flux that promotes smooth solder flow into the wick. This reduces the need for additional flux application and speeds up your workflow. The pre-fluxing also helps in preventing oxidation during use, ensuring a clean and efficient solder removal process every time.

Professional-Grade for Repair Shops & Hobbyists

Whether you’re a mobile repair technician, an electronics engineer, or a DIY electronics enthusiast, the 2UUL DW01 offers professional-grade performance in a convenient, ready-to-use form. Many technicians appreciate that the wick doesn’t fray or unravel easily, which helps maintain a consistent contact area with the solder joint and avoids mess on the workbench.

Five Rolls for Extended Use

Each pack contains five rolls of 3.0mm x 1.5m desoldering wick, giving you a total of 7.5 meters of high-quality braid. This ensures you won’t run out of wick in the middle of an important repair job. Having multiple rolls also means you can keep a spare in different workstations or toolkits, minimizing downtime and improving workflow efficiency.

Key Benefits of 2UUL DW01-3015 Mobi Desoldering Wick

• Fast & Clean Solder Removal – Quickly absorbs molten solder for a smooth, residue-free finish.

• Wide Coverage – The 3.0mm width is perfect for larger solder joints, big pads, and multi-pin connectors.

• Pre-Fluxed for Efficiency – Built-in flux ensures faster wicking and better solder flow.

• Oxidation-Resistant Copper – Maintains performance even after long storage periods.

• Economical 5-Pack – Offers great value with 7.5 meters of total wick length.

• Professional Quality – Trusted by mobile repair experts and electronics technicians worldwide.

Applications of 2UUL DW01

The 2UUL DW01-3015 is a versatile tool that can be used in multiple electronics repair scenarios, such as:

1. Mobile Phone Motherboard Repair – Removing solder from IC pads, cleaning CPU/GPU connections, and clearing shorted joints.

2. BGA Rework – Absorbing excess solder from ball grid arrays before reballing or replacement.

3. SMD Pad Cleaning – Prepping pads for new components by removing old solder without damaging the board.

4. Through-Hole Component Desoldering – Clearing solder from connector pins, switches, and other through-hole parts.

5. Fixing Short Circuits – Removing accidental solder bridges between fine-pitch pins.

6. General PCB Maintenance – Cleaning and reworking various types of printed circuit boards.

Why Choose 2UUL DW01 Over Generic Desoldering Wicks?

While there are many desoldering wicks on the market, the 2UUL DW01 stands out due to its consistent manufacturing quality and technician-focused design. Many cheaper alternatives use lower-grade copper or inadequate flux, which can lead to slower solder absorption, overheating, or pad damage. In contrast, the 2UUL DW01 is designed with a tight weave pattern, pure copper strands, and an even flux coating, all of which contribute to a faster, cleaner, and safer solder removal process.

Step-by-Step Guide to Using 2UUL DW01 Desoldering Wick

1. Power On Your Soldering Iron – Set it to an appropriate temperature (typically 320°C – 360°C for most leaded solders, higher for lead-free).

2. Place Wick on the Solder Joint – Position the braid directly over the solder you want to remove.

3. Apply the Soldering Iron Tip – Press the heated iron tip onto the wick. The heat will transfer through the braid to the solder.

4. Let the Wick Absorb the Solder – Wait until you see the solder flow into the copper braid.

5. Lift Wick & Iron Together – Avoid dragging the braid across pads to prevent damage.

6. Trim Used Section – Cut off the used portion of the braid and continue with a fresh section.

By following these steps, you can ensure optimal results with minimal risk to your PCB.

Maintenance & Storage Tips

To get the longest life and best performance from your 2UUL DW01:

• Store in a Cool, Dry Place – Moisture and humidity can cause oxidation, which reduces effectiveness.

• Keep in Sealed Packaging – Only open the rolls when needed to prevent dust and air exposure.

• Avoid Overheating – Excessive heat can burn off the flux prematurely.

• Replace When Discolored – If the braid turns dark or loses its shine, it may be oxidized and less effective.

Conclusion

The 2UUL DW01-3015 Mobi Desoldering Wick is the ultimate choice for anyone seeking a reliable, efficient, and professional-grade solder removal solution. Its pure copper construction, 3.0mm wide braid, and pre-fluxed design make it a superior tool for technicians working on mobile devices, PCBs, and other electronic equipment. With five rolls included, it offers excellent value, ensuring you’re always equipped for your next repair task.